This Wilwood brake kit developed by #antilag racing is a great way to lose 20+ lbs off the front of your 3000GT VR4 or Dodge Stealth AWD car and greatly expand the possible range of wheels that will fit without interfering with the extremely large OEM Sumitomo 4 piston calipers.
Additionally, as it becomes more and more difficult to acquire OEM or upgrade rotors for the 2G cars, this is a great way to eliminate some wear components that are Mitsubishi specific and change the car over to standard off the shelf Wilwood components. The only 3/s specific components are the rotor hat and caliper adapter bracket. Everything else can be had as easy replacements here, or at any Wilwood dealer.
The consumables are actually cheaper on average than the Mitsubishi specific parts, rotor rings are under $120 and pads under $50.
Features
1)Billet hat adapters to mount the Wilwood rotor ring and fit properly on the 3000GT / Stealth hub and bearing. Static mounting.
2)Billet one piece caliper bracket.
3)Grade 12.9 allen mounting hardware, including nordlock washers.
4)4 Piston Wilwood calipers
5)Wilwood HD 11.75 x .810 vented rotors.
6)Rotor to hat bolts. You will want to get some safety wire and pliars and use red loctite.
7)Brake lines
This is intended for drag race only, we ran these on our shop car for many hundreds of street miles and stops from 130+ at the drag strip with zero issues, but have to supply the standard legalese that we bear no responsibility for any issues caused by these brakes or related parts, including property damage, or bodily injury.
We previously ran StopTech brakes and for the use we put them through these feel just as good and better than OEM brakes, but for hard road course use you may want a setup that incorporates dynamic rotor to hat mounting.
Notable recommended torque values
Rotor hat to rotor ring 180 INCH pounds with red loctite and safety wire.
Caliper to adapter M10 bolts. 38 foot lbs with included nord lock washers
Adapter to knuckle bolts 65 foot lbs with included nord lock washers
1-2 Week Leadtime
